This guide explains how to integrate SO Connect in a Cisco Networks(with firmware 8.2.100 and above) WIFI infrastructure. For questions and help please contact us at: support@soconnect.io or +31 20 715 57 58
----------------------------------------------------------------------------------------------------
Step 1:
Go to "Security" in the top menu

go to "Authentication" in the sidebar

Click "New..."

Use the following settings:
Server IP Address(Ipv4/Ipv6): 87.233.181.54
Shared Secret: sowifihotspots
Confirm Shared Secret: sowifihotspots


Step 2:
Click New… again and use the following settings:
Server IP Address(Ipv4/Ipv6): 87.233.181.55
Shared Secret: sowifihotspots
Confirm Shared Secret: sowifihotspots


Go to "Accounting" in the sidebar
Click "New..."

Use the following settings:
Server IP Address(Ipv4/Ipv6): 87.233.181.54
Shared Secret: sowifihotspots
Confirm Shared Secret: sowifihotspots
Click "apply"

Click "New..." again

Server IP Address(Ipv4/Ipv6): 87.233.181.55
Shared Secret: sowifihotspots
Confirm Shared Secret: sowifihotspots
Click "Apply"

Step 4:
Go to "Access Control Lists" in the side menu

ACL Type: IPv4

Click "Apply"

Click the newly created list "guest-wifi-preauth"

Click "Add New Rule"

Use the following settings and click "Apply"

Click "Add New Rule" again

Use the following settings and click "Apply"

Click "Back"

Hover over the blue arrow right from ‘guest-wifi-preauth’ and select "Add-Remove URL "

Add the following URL’s you need to click add after every url:
hotspots.so-wifi.com
cloudfront.net
ssl.google-analytics.com
internetaccess.io
Add the domains below per social media platform if you would like to use them in the login portal.
facebook.com
fbcdn.net
akamaihd.net
connect.facebook.net
linkedin.com
licdn.net
licdn.com
twitter.com
twimg.com
instagram.com
Click "Back"

Step 5:
Go to Web Login Page in the side menu

Use the following settings:
Web Authentication Type: External (Redirect to external server)
Redirect URL after login: http://hotspots.so-wifi.com/portal/index/post-login-redirect
External Webauth URL: http://hotspots.so-wifi.com/partner/cisco/id/9999
**IMPORTANT**
For the External Webauth URL, replace the last 5 numbers show in the screenshot and link below. Replace them with the unique ID given to you by your SO Connect Dealer.

Click "Apply"

Step 6:
Go to WLANs
use the following settings

Select "Create New" and click "Go"

Click "Apply"

Click on then newly created profile
In General set Status to "enabled"

In Security layer 2 tab set Layer 2 security to "none"

In Security Layer 3 tab use the following settings:
Layer 3 Security: Web Policy
Authentication: checked
Pre-authentication ACL IPv4: guest-wifi-preauth

In security AAA server tab use the foloweing settings

Scroll down and select the "LOCAL" and "LDAP" settings and click the button

Click on the Advanced tab and change the following settings

Step 7:
Go to "Controller"

Set Fast SSID change to "Enabled"
Go to "management"

go to "HHTP-HTTPS"

Use the following settings:

------------------------------------------------------------------------------------------------------
This concludes the guide explaining "how to integrate SO Connect in a Cisco WIFI infrastructure". For questions and help please contact us at: support@soconnect.io or +31 20 715 57 58
Comments
0 comments
Please sign in to leave a comment.