Xclaim Wireless

Step 1:

Add a new Location ID by following the steps in this manual: Guide to setup a new Location ID or request a Location ID at your local SO Connect Reseller. 

Whenever you have received the Location ID, replace the [LOCATIONID] in the placeholder further down in the manual.

Step 2:

1. Login to Xclaim Cloud Dashboard
2. Go to Networks and click on 'Add Guest Network'
3. Select the options you prefer but make sure 'Enable Hotspot' is set to On
4. Save the network

Step 3:

1. Go to Access Points
2. Select the AP's you wish to use for this network
3. Select 'Bulk Action' -> Attach WLAN, tick the newly created network and click 'Attach WLAN'

Step 4:

1. Go Access Points > Hotspot Profile
2. Click 'Add Hotspot Profile' and enter the form with the following details:

Click 'Done'

Step 5:

1. Go Access Points
2. For each of the AP's you wish to use in this network click on the serial number and then select 'Hotspot' on the right. Make sure 'Enable' is set to 'On' and the profile 'Guest WIFI' is selected.
3. Everything is now set and ready for use. For best practices, make sure to reboot the AccessPoint after setting up this configuration.