Static IP for Zyxel, IBBS/L

This article explains how to change the WAN from DHCP to Static/Manual.

1. Connect your laptop/PC to a network port of the IBBS/L that has the VLAN15 LAN config set. By default on a Zyxel this is LAN port 3. By default on an AMD APU3 this is LAN port 1 which is the middle Network port of the three.
2. Make sure to turn off the WiFi on your laptop/PC, open your webbrowser and enter the following: 10.2.0.1
3. You will now see the configuration menu:
4. From here you can switch the "Internet Connection" Protocol from Automatic to Manual and enter all necessary details. When you're done click on "Save and Apply":